Conventional type cyclones are used in industrial facilities
to separate the large dust particles from the air and to
reduce the dust particle load coming to the collection filters.
Cyclones can hold all large dust particles up to 50μ, but not
those below 10μ.
Multicyclones are used in industrial facilities to separate
dust-laden waste gases such as flue gases and large dust
particles from the air. Dust holding efficiencies are higher
than those in conventional cyclones and the particle sizes
that can be held are much thinner and smaller.
The dusty gas entering the cyclone tangentially at high
speed from the cyclone inlet is given a helical flow form,
allowing the particles with higher density than the carrier
medium to be directed to the cyclone walls by centrifugal
force. Particles that lose their inertia due to the sudden
speed change in the cyclone filter through the cyclone wall
and flow into the high-angle conical storage bunker at the
bottom. As a result, the gas, which has been purified from
the dust it contains, is discharged out from the upper part
of the cyclone through the outlet pipe in the center of the
cyclone.
• Yüksek verimli toz partikülü tutabilme özelliği.
• Bunkerinde ön depolama avantajı
• Her türlü kapasite ve gaz için özel olarak dizayn
edilebilme.
• Düşük işletme ve bakım maliyeti.
