It is produced with computer aided design and high manufacturing technology in accordance with production standards, PED pressure vessels directive and TS EN12953 standards
Thanks to its small water and high steam volume, it shows high performance by producing continuous and high quality steam in accordance with sudden steam draws.
Given its small water volume, it enters the boiling regime more quickly and unnecessary energy consumption is prevented. It produces drier steam due to its optimum heating surface.
The burner’s electricity consumption is reduced and more comfortable combustion is provided as a result of low smoke path resistance. Moreover, a corrugated furnace construction is implemented in order to increase the strength of the combustion chamber in addition to making it flexible against thermal stresses.
The advantage of using three-pass boiler design is to reduce the load in the combustion chamber up to 1.2 MW/m³, hence providing an efficient combustion while keeping emission rates low making it environmentally friendly.
Since the smoke pipes are welded to the plates, it is suitable for safe operation and pipe replacement task is made effortless, extending the boiler’s life.
The efficiency of the boiler can be increased by 5%, depending on the capacity, if flue gas heat is transferred to the feed water or burner’s combustion air in an economizer.
With the use of optimum insulation material with high density, heat losses are reduced to a minimum and boiler efficiency is further increased.
Depending on the operating pressure, the boiler efficiency goes up to 91% without an economizer, thus achieving maximum efficiency with minimum fuel consumption.
It provides wide industrial usage area with its production of 100 kg/h up to 30 tons/h capacity, 0.5 bar up to 20 bar saturated steam and up to 400 ºC superheated steam.
